Shoe Factory Gatehouses
A new shoe factory complex in Wenzhou is about to open, but two gatehouses at its south entrance remain unfinished. Through the existing frames, one sees the West Yandang Mountains and a silver metal warehouse at their foot, diagonally across the entrance. The client wished to retain the frames to maintain continuity with the complex, while giving the entrance a character of its own.
Before the additions, the frames appeared nearly symmetrical, despite differences in their beams, columns and functions. One connects to the factory warehouse, the other to the administration building. Small in relation to the industrial complex, they are large for the everyday activities of guards and staff. The additions seek to reconcile these scales.
Nearly 20 metres apart, the gatehouses form the southern entrance together, yet each is also a gate. We thought of the Door Gods, a pair of guardian deities flanking the entrance. Similar in appearance yet different in posture and detail, they convey a sense of movement. We wanted a similar relationship between the two gatehouses: from a distance, they appear as a pair; up close, their differences gradually emerge.
New spaces are arranged diagonally within the frames, stepping to form three levels of planted terraces on one side and rising floor soffits over the entrances on the other. The silver corrugated metal cladding echoes the factory building, but with finer corrugations and perforated screens over the upper strip windows. The stepping volumes introduce a diagonal rhythm against the complex's horizontal facades.
Outside, the gatehouses appear almost mirrored, facing each other through their windows. Yet the alignment of new volumes with existing structures, and what each reveals or conceals, differs subtly.
Inside, the differences become clearer. The west gatehouse connects to production areas and retains the northern lift-lobby entrance. A central passage serves circulation and reception, while a long desk and sliding window form the public-facing counter. Two bedrooms and a terrace occupy the top level, with views towards the mountains and factory, and down into the floors below.
The east gatehouse provides a resting area for drivers and functions as an extension of the administration lobby. Above, suspended slabs and bridges create a sense of floating planes within the same space. Openings in the slabs shift diagonally, allowing views across different levels. In both gatehouses, the outdoor terraces face the interior platforms, opening the interiors to the outdoors.
Because the original frames were also recently built, they carry few traces of time. Rather than emphasizing old and new, we approached the design as a game of constraints within the existing frames. Once completed, the additions and existing structures become difficult to distinguish, together forming the indoor and outdoor spaces.
Almost no new columns reach the ground. The lower floors are suspended from the original concrete beams by 90 mm-diameter steel rods; T-section members suspend the beams beneath sliding windows, while the top floor rests on the existing structure. C-section steel decking and cast-in-place concrete integrate concealed services. The exposed decking is finished in semi-gloss cool grey, while the original concrete receives a thin coat of white paint, retaining its texture. We sought to bring nature indoors, framing views of the northern mountains and surrounding trees through windows. Custom furniture in pale hard maple, together with indoor and outdoor planting and warm-toned terrace gravel paving, creates a sense of comfort and ease in everyday factory life.





































